Controller Pinout[1]
Notes: Male is connector at the controller. Female is connector at the console. Diagram pictured is of the connector at the controller end. The Jaguar controller interface acts like a keyboard matrix, scanning across the column pins and reading the row pin output to determine button pressed. Pins 5 and 15 are the analog pins which only function on boards with U16 (ADC0844) present.
| Pin # | Description: K Serial | Description: M Serial |
|---|---|---|
| 1 | /Column 1 address | /Column 1 address |
| 2 | /Column 2 address | /Column 2 address |
| 3 | /Column 3 address | /Column 3 address |
| 4 | /Column 4 address | /Column 4 address |
| 5 | CH1/CH3 (Port 1/Port 2) | N/C |
| 6 | Row 1 data | Row 1 data |
| 7 | VCC | VCC |
| 8 | N/C | N/C |
| 9 | GND | GND |
| A | Row 2 data | Row 2 data |
| B | Row 3 data | Row 3 data |
| C | Row 4 data | Row 4 data |
| D | Row 5 data | Row 5 data |
| E | Row 6 data | Row 6 data |
| F | CH2/CH4 (Port 1/Port 2) | N/C |
Cartridge Pinout[2]
Note: Side B faces towards the front of the console (towards the controller ports) and side A faces towards the rear of the console (towards the AV connector). Pins A13, A14, B13 and B14 physically do not exist, and are blocked off to act as a key for cartridges.
| Pin # | Name | Description | Pin # | Name | Description | Pin # | Name | Description | Pin # | Name | Description |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A1 | EA10 | Address line 10 | A28 | ED6 | Data line 6 | B1 | GND | Ground | B28 | N/C | Not Connected |
| A2 | EA9 | Address line 9 | A29 | ED9 | Data line 9 | B2 | GND | Ground | B29 | GND | Ground |
| A3 | EA11 | Address line 11 | A30 | ED13 | Data line 13 | B3 | EA23 | Address line 23 | B30 | UARTI | |
| A4 | EA8 | Address line 8 | A31 | ED2 | Data line 2 | B4 | EA22 | Address line 22 | B31 | UARTO | |
| A5 | EA12 | Address line 12 | A32 | ED5 | Data line 5 | B5 | EA21 | Address line 21 | B32 | GND | Ground |
| A6 | EA7 | Address line 7 | A33 | ED10 | Data line 10 | B6 | EA20 | Address line 20 | B33 | RESETIL | |
| A7 | EA13 | Address line 13 | A34 | ED12 | Data line 12 | B7 | EA19 | Address line 19 | B34 | CART_IN | Power Switch connection, Cart shorts to CART_OUT |
| A8 | EA6 | Address line 6 | A35 | ED3 | Data line 3 | B8 | GND | Ground | B35 | CART_OUT | Power Switch connection, Cart shorts to CART_IN |
| A9 | EA14 | Address line 14 | A36 | ED4 | Data line 4 | B9 | N/C | Not Connected | B36 | VCC | +5VDC |
| A10 | EA5 | Address line 5 | A37 | ED11 | Data line 11 | B10 | GND | Ground | B37 | VCC | +5VDC |
| A11 | EA15 | Address line 15 | A38 | VCC | +5VDC | B11 | N/C | Not Connected | B38 | PLL | |
| A12 | EA4 | Address line 4 | A39 | ED31 | Data line 31 | B12 | GND | Ground | B39 | N/C | Not Connected |
| A13 | KEY | Physical Keying | A40 | ED16 | Data line 16 | B13 | KEY | Physical Keying | B40 | E2DATA | |
| A14 | KEY | Physical Keying | A41 | ED23 | Data line 23 | B14 | KEY | Physical Keying | B41 | N/C | Not Connected |
| A15 | EA16 | Address line 16 | A42 | ED24 | Data line 24 | B15 | EA1 | Address line 1 | B42 | GPIO0 | |
| A16 | EA3 | Address line 3 | A43 | ED30 | Data line 30 | B16 | EA0 | Address line 0 | B43 | GPIO1 | |
| A17 | EA17 | Address line 17 | A44 | ED17 | Data line 17 | B17 | WAITL | B44 | GPIO2 | ||
| A18 | EA2 | Address line 2 | A45 | ED22 | Data line 22 | B18 | RESETL | B45 | GPIO3 | ||
| A19 | EA18 | Address line 18 | A46 | ED25 | Data line 25 | B19 | EWE0L | B46 | GPIO4 | ||
| A20 | ROM1 | A47 | ED29 | Data line 29 | B20 | EWE2L | B47 | SCK | |||
| A21 | GND | Ground | A48 | ED18 | Data line 18 | B21 | ERW | B48 | WS | ||
| A22 | ED15 | Data line 15 | A49 | ED21 | Data line 21 | B22 | EOE1L | B49 | TXD | ||
| A23 | ED0 | Data line 0 | A50 | ED26 | Data line 26 | B23 | EOE0L | B50 | RXD | ||
| A24 | ED7 | Data line 7 | A51 | ED28 | Data line 28 | B24 | GND | Ground | B51 | GND | Ground |
| A25 | ED8 | Data line 8 | A52 | ED19 | Data line 19 | B25 | EINT0 | B52 | ECPUCLK | ||
| A26 | ED14 | Data line 14 | A53 | ED20 | Data line 20 | B26 | EINT1 | B53 | GND | Ground | |
| A27 | ED1 | Data line 1 | A54 | ED27 | Data line 27 | B27 | 9V | +9VDC | B54 | GND | Ground |
A/V Output Pinout[2]
Note: Side A faces up, side B faces down. Atari manuals call side A "Component side" and side B "Solder Side"
| Pin # | Description | Pin # | Description |
|---|---|---|---|
| A1 | Audio Left | B1 | Audio Right |
| A2 | Audio GND | B2 | Audio GND |
| A3 | N/C | B3 | Video GND |
| A4 | Video GND | B4 | Red |
| A5 | Blue | B5 | VSYNC |
| A6 | HSYNC | B6 | N/C |
| A7 | Green | B7 | Video GND |
| A8 | Chroma | B8 | Luma |
| A9 | N/C | B9 | GND |
| A10 | INC | B10 | Video GND |
| A11 | 9V | B11 | Composite |
| A12 | N/C | B12 | N/C |
DSP Port Pinout[2]
Note: Side A faces up, side B faces down. Atari manuals call side A "Component side" and side B "Solder Side"
| Pin # | Description | Pin # | Description |
|---|---|---|---|
| A1 | U15 GND | B1 | VCC |
| A2 | SCK | B2 | UARTO |
| A3 | WS | B3 | UARTI |
| A4 | TXD | B4 | N/C |
| A5 | RXD | B5 | N/C |
| A6 | U15 GND | B6 | GND |
References: