The GlitchMod knowledge base

Controller Options

If your CD-i model has a built-in RF receiver (which is essentially every model excluding the 450 / 550 / FW380i), you have the option to use an IR remote or universal remote. These remotes have remote codes pre-loaded specifically for the…

1 min readUpdated Oct 9, 2026

If your CD-i model has a built-in RF receiver (which is essentially every model excluding the 450 / 550 / FW380i), you have the option to use an IR remote or universal remote.

Dedicated IR Remotes

These remotes have remote codes pre-loaded specifically for the CD-i.

Programmable Remotes

Universal remotes can be programmed with codes for the CD-i.

  • Logitech Harmony IR remotes
    • Manufacturer: Philips
    • Model: CDi 220

Controller Adapters

Keep exploring

CD-i:Service ShellPins 2 and 3 bridged The CD-i has a menu to run various tests accessible via bridging pins 2 and 3 …CD-i:CD-i CXA1145 RGB ModAs long as your NTSC CD-i has the Sony CXA1145P or CXA1145M chip (Mono II and earlier motherboards)…CD-i:Low Level TestThe low-level test menu The Philips CD-i has a low-level test menu accessible via the I/O 2 (or "In…CD-i:Video Output NotesCD-i players offer various video outputs depending on the model, version and revision[1]. RF (mainl…CD-i:CD-i Model DifferencesSome page content & researching collaboratively taken from io55.net's CD-i page with permission. Co…CD-i:List of Digital Video Card GamesSome CD-i games require the digital video card to play. Some games are enhanced by it. List pulled …